james90 Posted March 3, 2013 Author Share Posted March 3, 2013 nice, i like the white LP. what year? the head, which is pretty battered, but 95% functional. one of the switches doesn't work properly, pots are a bit noisy, and the lights are broken but otherwise, it seems legit the 4x12 is overkill, and i was intending on selling it, but then i opened it up and found greenbacks. i was expecting some no name speakers, but this was a nice surprise. also, the pedalboard which is finally temporarily complete. not sure if i'll need to replace my delay pedal or not...still doesn't work properly the amp footswitch is acting up as only one LED works, but i don't know if the amp is causing that or the footswitch itself Link to comment Share on other sites More sharing options...
PVO_Dave Posted March 3, 2013 Share Posted March 3, 2013 nice axes Dave! I like the fenders! Thanks both nice, i like the white LP. what year? It's a 2008, so proper ebony board etc.. - Starting to yellow a bit now too, more than the photos show anyway Link to comment Share on other sites More sharing options...
Will_ Posted March 3, 2013 Share Posted March 3, 2013 Okay got it to work. Here's my guitar and equipment. I also have a Strat copy but i was too lazy to get it out the CUPBOARD Cupboard? Link to comment Share on other sites More sharing options...
Lexical_Whale Posted March 3, 2013 Share Posted March 3, 2013 Cupboard? Do they not teach English in school anymore? Link to comment Share on other sites More sharing options...
Neil. Posted March 3, 2013 Share Posted March 3, 2013 Cupboard? "closet" to you lot. Probably have to measure the size of it in foreignheight or sommet. "Yeah it's 11 and 7/8's inches to the back of the 12th century on this one." here's an accurate graph to help you understand: On more relevant news, jaeaaems, that amp is a nice find. Have you tried it with any of your other amp heads? Link to comment Share on other sites More sharing options...
james90 Posted March 3, 2013 Author Share Posted March 3, 2013 "closet" to you lot. Probably have to measure the size of it in foreignheight or sommet. "Yeah it's 11 and 7/8's inches to the back of the 12th century on this one." here's an accurate graph to help you understand: graff.jpg On more relevant news, jaeaaems, that amp is a nice find. Have you tried it with any of your other amp heads? metric was more difficult for me to learn, but then again, i am americaish and drive on the correct side of the road and do you mean the cab? i haven't yet, but i'm already thinking of swapping out two of the speakers for something with more power handling... 100 watt head with 100 watt cab generally isn't the best idea (at least if you're running it at high volumes) Link to comment Share on other sites More sharing options...
Neil. Posted March 3, 2013 Share Posted March 3, 2013 metric was more difficult for me to learn, but then again, i am americaish and drive on the retarded side of the road fixed. Yeah I never really understood the whole thing about balancing cabs with certain amp heads. It confuses me how a 4x12 can sound shit with a 100W amp head, but then sounds tasty with a little 1/4W amp head. maybe if it was explained in metric. Link to comment Share on other sites More sharing options...
haze015 Posted March 3, 2013 Share Posted March 3, 2013 "closet" to you lot. Probably have to measure the size of it in foreignheight or sommet. "Yeah it's 11 and 7/8's inches to the back of the 12th century on this one." here's an accurate graph to help you understand: On more relevant news, jaeaaems, that amp is a nice find. Have you tried it with any of your other amp heads? Except Great Britain. Except the month, day, year thing, as that is plain stupid. And driving on the right hand side is bad etiquette. If you're copying the French, then you are doing it wrong. Link to comment Share on other sites More sharing options...
james90 Posted March 3, 2013 Author Share Posted March 3, 2013 fixed. Yeah I never really understood the whole thing about balancing cabs with certain amp heads. It confuses me how a 4x12 can sound shit with a 100W amp head, but then sounds tasty with a little 1/4W amp head. maybe if it was explained in metric. http://en.wikipedia.org/wiki/File:Countries_driving_on_the_left_or_right.svg and to be honest, i would only really change it so the speakers don't get damaged. the amp probably puts out more than 100w peak. plus i think V30s or something would be a better match anyway, but it's fine for the time being. Link to comment Share on other sites More sharing options...
Phill Posted March 3, 2013 Share Posted March 3, 2013 Link to comment Share on other sites More sharing options...
Dominic. Posted March 3, 2013 Share Posted March 3, 2013 Ooo Link to comment Share on other sites More sharing options...
Guest Posted March 3, 2013 Share Posted March 3, 2013 ffs Phill. Link to comment Share on other sites More sharing options...
D3adstar Posted March 3, 2013 Share Posted March 3, 2013 (edited) that Triamp Edited March 3, 2013 by D3adstar Link to comment Share on other sites More sharing options...
james90 Posted March 3, 2013 Author Share Posted March 3, 2013 the bulb that makes the front panel light up was broken, so i had to remove it completely sounds great though, even through these old man speakers can't believe they discontinued it...mostly leaves them with the tubemeister series Link to comment Share on other sites More sharing options...
D3adstar Posted March 3, 2013 Share Posted March 3, 2013 the bulb that makes the front panel light up was broken, so i had to remove it completely sounds great though, even through these old man speakers can't believe they discontinued it...mostly leaves them with the tubemeister series Im guessing your going to replace the bulb? Then it will be completed in all its incredible goodness... Link to comment Share on other sites More sharing options...
james90 Posted March 3, 2013 Author Share Posted March 3, 2013 Im guessing your going to replace the bulb? Then it will be completed in all its incredible goodness... I don't know where to get one but still... Hughes & Kettner Triamp MK II by crystallettuce, on Flickr also, my pedalboard again... in the dark Pedalboard by crystallettuce, on Flickr got the footswitch LEDs working. someone screwed up the MIDI module thing in the amp, but it was a fairly simple fix Link to comment Share on other sites More sharing options...
D3adstar Posted March 3, 2013 Share Posted March 3, 2013 I don't know where to get one but still... Hughes & Kettner Triamp MK II by crystallettuce, on Flickr also, my pedalboard again... in the dark Pedalboard by crystallettuce, on Flickr got the footswitch LEDs working. someone screwed up the MIDI module thing in the amp, but it was a fairly simple fix HNNNNNNNNNNGHGHGH Link to comment Share on other sites More sharing options...
Lord MFC Posted March 3, 2013 Share Posted March 3, 2013 That's damn sexy, and would look awesome on stage! Link to comment Share on other sites More sharing options...
kueller Posted March 3, 2013 Share Posted March 3, 2013 Needs more lasers. Link to comment Share on other sites More sharing options...
Lord MFC Posted March 3, 2013 Share Posted March 3, 2013 And Fuzz Factory/XY combinations Link to comment Share on other sites More sharing options...
Neil. Posted March 3, 2013 Share Posted March 3, 2013 does that pedlol in the middle have glowing knobs? Link to comment Share on other sites More sharing options...
cheddatom Posted March 4, 2013 Share Posted March 4, 2013 that pedal board night-shot is so sexy. Shame about the shitty carpet! Link to comment Share on other sites More sharing options...
Dave. Posted March 4, 2013 Share Posted March 4, 2013 that pedal board night-shot is so sexy. Shame about the shitty carpet! This is what we want! (Sorry about the dog, it was an imperfection from the factory) Link to comment Share on other sites More sharing options...
james90 Posted March 4, 2013 Author Share Posted March 4, 2013 And Fuzz Factory/XY combinations lel does that pedlol in the middle have glowing knobs? nah, it's probably because the LED from the wah pedal is shining on them Link to comment Share on other sites More sharing options...
Neil. Posted March 4, 2013 Share Posted March 4, 2013 ah right. LED based dials look awesome. I love them on my APC40. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now